Chemical Protection

Apron 

BIB style apron for chemical splash protection. CE category I. Loops over neck with tie strings around the operators back. Cleanroom compatible to Class 100. Body, sleeves and straps are multi-layer polyethylene 300µ thick. Available in white or blue

Application property: CE category I: professional garments, intended to protect against liquid, chemical, product splashes (limited contact times). This garment is designed to protect the front of the operator where covered.

 

User limits and warning: This garment is for single use applications. Check if the protection level is sufficient. The user can wear this garment with other equipments but must insure that other equipment does not deteriorate the protection efficiency of this item. Avoid all contact with heat sources (inflammable products). For more information, contact your distributor. The manufacturer is excluded from liability for improper use of the garment.
Wearing and altering: The garment must be used in accordance with the design. Check connections with accessories before use.
Prior to use: Check garment for obvious damage, do not wear if faulty, notably near to any joins or connecting areas.
Ergonomic: The garment is manufactured for the user to clearly identify the application of use.
Test references: EN 340: general requirement. EN 1513 (94): protection against liquid chemical products.
Washing & De-Contamination: The product is single use only, hence no recommendations.
Storage instructions: Garments should be stored in normal dry storage conditions. Do not store in sunlit position.
Recycling: The garment is made from polyethylene with EVA, this is not a danger for the environment and can be incinerated.
 

 

Gown 

A yellow multi-layer polyethylene gown for chemical protection, CE category II.

The garment features a single wrap around panel with welded sleeves elasticated at the wrist. The garment is turned up at the bottom on the outside by 5 cm in order to capture any splashes that run down, avoiding risk to the operators lower legs or feet. Entry is from the rear with 2 tie strings around the operators back. Cleanroom compatible to Class 100.Body, sleeves and straps are multi-layer polyethylene with EVA 100µ thick, yellow outside and white inside.

 

Application property: CE category II: professional garments, intended to protect against liquid, chemical, product splashes (limited contact times). This garment is designed to protect the front of the operator on the upper body, arms and upper legs.

User limits and warning: This garment is for single use applications. Check if the protection level is sufficient. The user can wear this garment with other equipments (shoes, gloves…) but must insure that other equipment does not deteriorate the protection efficiency of this item. Avoid all contact with heat sources (inflammable products). For more information, contact your distributor.

The manufacturer is excluded from liability for improper use of the garment.
Wearing and altering: The garment must be used in accordance with the design. Check connections with accessories before use.

Prior to use: Check garment for obvious damage, do not wear if faulty, notably near to any joins or connecting areas.
Ergonomic: The garment is manufactured for the user to clearly identify the application of use.
Test references: EN 340: general requirement. EN 1513 (94): protection against liquid chemical products.

 

 

Washing & De-Contamination: The product is single use only, hence no recommendations.

Storage instructions: Garments should be stored in normal dry storage conditions. Do not store in sunlit position.

Recycling: The garment is made from polyethylene with EVA, this is not a danger for the environment and can be incinerated.
 

Indicator

Size

 

3

4

5

6

A ±20

1320

1410

1500

1590

B ±10

750

750

750

750

C ±20 C'±20

530

530

530

560

D ±15

70

70

70

70

E ±20

1810

1880

1950

2060

F ±10

200

200

200

200

G ±10

70

70

70

70

 

 

Mechanical performances

Test method

Average values

Classification

Abrasive resistance

EN 530

1000 cycles

3

Jamming resistance

ISO 5978

sticking

1

Flexibility resistance

ISO7854

134102 cycles

2

Perforation resistance

EN 863

7, 8 N

1

Explosion resistance

ISO 2960

No measurable

6

Inflammation resistance

EN 5312

Superior edge reached

No Classed

Sewing resistance

ISO 5082

100 N

3

Chemical resistance Liquid permeability resistance

Test method

Average values

Classification

Sulphuric acid 40%

EN 374 - 3

> 480 min

6

Sodium hydroxide 20%

EN 374 - 3

> 480 min

6

White spirit

EN 369

9,3 min

No Classed

Perchloroethyline

EN 369

4,2 min

No Classed

Methyl ethyl ketone

EN 369

6,4 min

No Classed

 

 

Spacel 2000, 3000 & 4000

A range of Light weight coveralls made of polyethylene of various thickness from 50 to 150 microns with fitted hood for every day work, offering good protection in risk areas from CE category I to CE category III. Ventilated for comfort.

 

Applications:

High quality professional garments, intended to protect against liquid, chemical and product splashes (limited contact times). The garments are designed to give full body protection.

Chemical resistant. Waterproof, dustproofd and protection during maintenance, manufacturing, cleansing and hazardous applications.

Properties:

Chemical resistant, flexible and noiseless material ensures no tears at welding points. Completely fiberfree, Cleanroom compatable, good protection against liquids and dust. Base material polyethylene giving high chemical resistance    against for example acids, salts and paints.                                                                                                                                                                                                                                                       

 

Test references:

EN 340: general requirement. EN 1513 (94): protection against liquid chemical products.

Garment features

AP

Back ventilation

GPS

Welded at the gloves and feet

RA

Adhesive flap at the fastening

PS

Welded at the feet

EBJ

Elasticated at the arms and legs

EB

Elasticated at the arms

GC

Glued gloves

XX

Special options on request

SAS

Non-slip welded overshoes

 

 

 

Spacel 2000

Material: Special blue polyethylene 50µ thick,
polyamide zip fastener

 

Models available

References

Category

Order Code

2000 EBJ

I

4180130

2000 AP/EBJ

I

4180131

2000 XX

I

 

 


 

Spacel 3000

 

Material: Multi-layer polyethylene with EVA 100µ thick, yellow outside and white inside, polyamide zip fastener

 

 

Models available

 

 

 

Category

Type CE

References

3000 EBJ

II

Type 6

4180140

3000 AP/EBJ

II

Type 6

4180133

3000 AP/RA/EBJ

III

Type 4

4180148

3000 RA/EBJ

III

Type 3 & 5

4180148

3000 RA/GC/PS

III

Type 3&5

4573020

 

 

 

 

Spacel 4000

Material: Multi-layer polyethylene with EVA 150µ thick, green, polyamide zip fastener

 

 

Category

Type CE

References

4000 RA/EBJ

III

Type 3&5

4180130

4000 RA/GC/PS

III

Type 3&5

4180131


 

Sign up