|
SUPER-CLEAN
COVERALLS
|
|
|
|
Super-Clean
Coverall with Downflow Construction (CE1210, CE1610)
Meets Classes 1 - 10 Clean room
requirements
Utilizes the air currents in the
super-clean room to prevent air contamination
Use of tricot for collar
Laser cutting for even
less dust generation
Side zipper design minimises
forward dust generation
Special construction forces
trapped air to flow downward, releasing any dust generated
during work onto the latticed floor.
Lining from waist to knee
for female type.
|
|
 |
|
|
Super-Clean
Coverall with Hood and Downflow Construction (CE1305,
CE1805)
Meets Classes 1 - 10 Clean room
requirements
Laser cut for even less dust generation
Side zipper from hood to waist
Double sleeves prevent dust from
escaping
Special construction forces air
to flow downward, releasing any dust generated during
work onto the latticed floor
Lining from waist to knee for
female type (both long and short type boots can be worn)
|
| |
|
Ultra-antistatic
Downflow-Type Super-Clean Coverall (LB1200, LB1700)
Meets Classes 1 - 10 Clean room
requirements
Laser cutting and heat-welding
for even less dust generation.
Double sleeves prevent dust from
escaping
Side zipper design minimises forward
dust generation
Special construction forces trapped
air to flow downward, releasing any dust generated during
work onto the latticed floor
Lining from the waist to the knee
for female type (both long and short boots can be worn)
|
|
|
|
|
|
LS1480
Suction System
Meets Classes 1 - 10 Clean room
requirements
A newly developed suction system
designed to maximise the performance in a clean room
Comprises a hood, duct hose and
a suction unit
A suction unit with a superb performance,
though small and lightweight, being equipped with a
high-performance filter
A rechargeable NiCad battery,
separable from the hood
A wider view with the design of
the hood, making work easier over extended time periods.
|
|
|
|
UC-1015,
1018
These uniforms are for class 1,10.
These uniforms are ideal for HDD
(GMR) usage with excellent static control.
Uniform static control even after
being washed more than 100 times.
It is attached with a hood for
highly effective dust restraint
These restrain air permeation
to the maximum, but provides excellent humidity permeation.
The waist of 1015 is adjusted
with a string.
1018 is treated with band at waist.
The zipper is located at the front.
Lining treatment for preventing
see-through phenomena
|
|
|
|
|
|
UC-1025,
1028
These uniforms are for class 10.
Made of high density textiles
not to allow passing through of ultra-fine particles
at semiconductor FAB lines.
These restrain air permeation,
but provides best humidity permeation.
Uses 3/2 twill material for pleasant
and soft feeling.
The waist of 1025
is equipped with a band
The waist of 1028 is adjusted
with a string
The zipper is located at the side
Lining treatment
for preventing see-through phenomena.
|
|
|
|
UC-1035,
1038
Meets Classes 1 - 10 Clean room
requirements
Utilizes the air currents in the
super-clean room to prevent air contamination
Laser cutting for even less dust
generation
Double sleeves prevent dust from
escaping
Side zipper design minimises forward
dust generation
Special construction forces trapped
air to flow downward, releasing any dust generated during
work onto the latticed floor.
Lining from waist to knee for
female type.
|
|
|
|
|
