|
A yellow multi-layerpolyethylene
gown, for chemical protection, CE category II.
The garment features
a single wrap around panel with welded sleeves elasticated
at the wrist. The garment is turned up at the bottom
on the outside by 5 cm in order to capture any splashes
that run down, avoiding risk to the operators lower
legs or feet. Entry is from the rear with 2 tie strings
around the operators back. Cleanroom compatible to Class
100. Body,
sleeves and straps are multi-layer polyethylene with
EVA 100µ thick, yellow outside and white
inside.
Application property:
CE category II: professional garments, intended to protect
against liquid, chemical, product splashes (limited
contact times). This garment is designed to protect
the front of the operator on the upper body, arms and
upper legs.
User limits and warning:
This garment is for single use applications. Check
if the protection level is sufficient. The user can
wear this garment with other equipments (shoes, gloves…)
but must insure that other equipment does not deteriorate
the protection efficiency of this item. Avoid all contact
with heat sources (inflammable products). For more information,
contact your distributor.
The manufacturer is excluded from liability for improper
use of the garment.
Wearing and altering:
The garment must be used in accordance with the design.
Check connections with accessories before use.
Prior to use: Check garment
for obvious damage, do not wear if faulty, notablynear
to any joins or connecting areas.
Ergonomic: The garment
is manufactured for the user to clearly identify the
application of use.
Test references: EN 340: general
requirement. EN 1513 (94): protection against liquid
chemical products.
Washing & De-Contamination:
The product is single use only, hence no recommendations.
Storage instructions: Garments
should be stored in normal dry storage conditions. Do
not store in sunlit position.
Recycling: The garment is made
from polyethylene with EVA, this is not a danger for
the environment and can be incinerated.
|
Application
property: CE category I: professional garments,
intended to protect against liquid, chemical, product
splashes (limited contact times). This garment is
designed to protect the front of the operator where
covered.
Applications:
